There are few standards and guidelines on indoor air in Australia, and little information is available on indoor air quality in Australian buildings. The development of existing controls has relied heavily on overseas data and often lags behind the implementation of controls elsewhere. Indoor air standards have been developed for ventilation in public buildings commensurate with U.S. standards. A recommended goal for formaldehyde exposure levels has been set at 0.1 ppm and a remedial action level for radon at 200 Bq/m^3. Nitrogen dioxide, particulates and volatile organic compounds are currently under review. Other indoor issues are not yet being considered at a formal level. This paper discusses the current status of the control and regulation of indoor air quality and provides an overview of indoor air research in Australia.

Keywords:
Nitrogen dioxide, Radon, Volatile organic compounds, Pesticides, Formaldehyde, Particulates, Bioaerosols, Ventilation
This content is only available via PDF.
1993
Copyright / Drug Dosage / Disclaimer
Copyright: All rights reserved. No part of this publication may be translated into other languages, reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, microcopying, or by any information storage and retrieval system, without permission in writing from the publisher.
Drug Dosage: The authors and the publisher have exerted every effort to ensure that drug selection and dosage set forth in this text are in accord with current recommendations and practice at the time of publication. However, in view of ongoing research, changes in government regulations, and the constant flow of information relating to drug therapy and drug reactions, the reader is urged to check the package insert for each drug for any changes in indications and dosage and for added warnings and precautions. This is particularly important when the recommended agent is a new and/or infrequently employed drug.
Disclaimer: The statements, opinions and data contained in this publication are solely those of the individual authors and contributors and not of the publishers and the editor(s). The appearance of advertisements or/and product references in the publication is not a warranty, endorsement, or approval of the products or services advertised or of their effectiveness, quality or safety. The publisher and the editor(s) disclaim responsibility for any injury to persons or property resulting from any ideas, methods, instructions or products referred to in the content or advertisements.
You do not currently have access to this content.