After exposing enamel specimens to 0.3% citric acid at pH 3.2 for various times, the acid was titrated to pH 7 before rinsing the specimens in water. After freeze-drying the specimens were examined by scanning electron microscopy. This procedure eliminates artefacts due to drying and mineral precipitation. The results showed that the outer region of softened enamel is much more delicate than previously thought, even after short (5- to 20-min) etching times. Mineral was lost from both prism boundaries and the prism bodies, resulting in a surface presenting thin, separate crystal bundles. In further studies, replicas of subsurface pores, created by resin impregnation, showed the softening depth to be several times greater than is suggested by techniques based on removing the softened enamel by physical forces. The results point to a need for improved methods of measuring softening depth. More importantly, it appears that the outer region of the softened layer remaining after an erosive challenge might be too fragile to resist frictional forces in vivo.

Keywords:
Demineralisation, Enamel softening, Replicas, Scanning electron microscopy
This content is only available via PDF.
© 2004 S. Karger AG, Basel
2003
Copyright / Drug Dosage / Disclaimer
Copyright: All rights reserved. No part of this publication may be translated into other languages, reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, microcopying, or by any information storage and retrieval system, without permission in writing from the publisher.
Drug Dosage: The authors and the publisher have exerted every effort to ensure that drug selection and dosage set forth in this text are in accord with current recommendations and practice at the time of publication. However, in view of ongoing research, changes in government regulations, and the constant flow of information relating to drug therapy and drug reactions, the reader is urged to check the package insert for each drug for any changes in indications and dosage and for added warnings and precautions. This is particularly important when the recommended agent is a new and/or infrequently employed drug.
Disclaimer: The statements, opinions and data contained in this publication are solely those of the individual authors and contributors and not of the publishers and the editor(s). The appearance of advertisements or/and product references in the publication is not a warranty, endorsement, or approval of the products or services advertised or of their effectiveness, quality or safety. The publisher and the editor(s) disclaim responsibility for any injury to persons or property resulting from any ideas, methods, instructions or products referred to in the content or advertisements.
You do not currently have access to this content.