Quality standards for dialysis water have existed for more than 25 years. Current standards generally agree concerning the maximum allowable levels of chemical contaminants; however, significant differences exist concerning the maximum allowable levels of microbiological contaminants and the methods used to measure them. While quality standards for dialysis water are common, there are relatively few standards or recommendations for dialysis fluid quality and these also differ markedly in the maximum allowable level for microbiological contaminants. Compliance with quality standards for dialysis water and dialysis fluid appears to have improved over the past 20 years, although the actual extent of compliance is difficult to assess. A universal standard for fluid quality might be of benefit to the wider dialysis community; however, progress towards that goal will depend on resolution of important issues, including how the standard is to be applied, if it should be limited to substances with documented toxicity for hemodialysis patients, and how to address microbiological contaminants.

Keywords:
Hemodialysis, Fluid quality, Standards
This content is only available via PDF.
© 2009 S. Karger AG, Basel
2009
Copyright / Drug Dosage / Disclaimer
Copyright: All rights reserved. No part of this publication may be translated into other languages, reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, microcopying, or by any information storage and retrieval system, without permission in writing from the publisher.
Drug Dosage: The authors and the publisher have exerted every effort to ensure that drug selection and dosage set forth in this text are in accord with current recommendations and practice at the time of publication. However, in view of ongoing research, changes in government regulations, and the constant flow of information relating to drug therapy and drug reactions, the reader is urged to check the package insert for each drug for any changes in indications and dosage and for added warnings and precautions. This is particularly important when the recommended agent is a new and/or infrequently employed drug.
Disclaimer: The statements, opinions and data contained in this publication are solely those of the individual authors and contributors and not of the publishers and the editor(s). The appearance of advertisements or/and product references in the publication is not a warranty, endorsement, or approval of the products or services advertised or of their effectiveness, quality or safety. The publisher and the editor(s) disclaim responsibility for any injury to persons or property resulting from any ideas, methods, instructions or products referred to in the content or advertisements.
You do not currently have access to this content.