Introduction: Intracochlear pressure changes have been assumed to play a central role in hearing preservation during cochlear implantation. The pressure in different settings has been evaluated (temporal bones vs. cochlea models) and was found to have advantages and disadvantages. Experimentally, problems have been discussed to influence the results substantially. Objective: The aim of the present study was to evaluate the effect of intracochlear air on the measurements in a cochlea model by using a fiber optic pressure sensor. Materials and Methods: The experiments were performed in an uncurled 3D printed full cochlea model. A microfiber-optic pressure sensor was inserted, and intracochlear pressures were evaluated under 3 conditions: (1) cochlea model filled to 100% with fluid, (2) cochlea model filled with air, and (3) cochlea model filled to approximately 50% with fluid. Since the cochlea model is transparent, a direct visualization of air under the microscope was possible when performing the insertions. Results: In the first condition, the mean intracochlear pressure at the end of the insertion was 0.044 psi (SD 0.012, 95% CI). In the second setting, the results were similar. In the last scenario, with 50% filling, the mean intracochlear pressure was statistically significantly different with a mean value of 0.074 psi (SD 0.013, 95% CI) (p < 0.0044, ANOVA). Besides this, in the last condition with 50% fluid, a plateau was formed when the fiber optic reached the air portion. Conclusion: The results obtained in a 3D printed full cochlea model show the importance of a direct evaluation of air inside the experimental setting. The exclusion of intracochlear air should be an important factor for the choice of the model for intracochlear pressure measurement (temporal bone vs. cochlea model).

Keywords:
Intracochlear air, Pressure, Residual hearing, Cochlea model
This content is only available via PDF.
© 2021 S. Karger AG, Basel
2021
Copyright / Drug Dosage / Disclaimer
Copyright: All rights reserved. No part of this publication may be translated into other languages, reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, microcopying, or by any information storage and retrieval system, without permission in writing from the publisher.
Drug Dosage: The authors and the publisher have exerted every effort to ensure that drug selection and dosage set forth in this text are in accord with current recommendations and practice at the time of publication. However, in view of ongoing research, changes in government regulations, and the constant flow of information relating to drug therapy and drug reactions, the reader is urged to check the package insert for each drug for any changes in indications and dosage and for added warnings and precautions. This is particularly important when the recommended agent is a new and/or infrequently employed drug.
Disclaimer: The statements, opinions and data contained in this publication are solely those of the individual authors and contributors and not of the publishers and the editor(s). The appearance of advertisements or/and product references in the publication is not a warranty, endorsement, or approval of the products or services advertised or of their effectiveness, quality or safety. The publisher and the editor(s) disclaim responsibility for any injury to persons or property resulting from any ideas, methods, instructions or products referred to in the content or advertisements.
You do not currently have access to this content.